2025 Caterpillar Landfill Compactors 816
- Year 2025
- Make Caterpillar
- Model Landfill Compactors
- Engine Model: Cat® C7.1:
2025 Caterpillar Landfill Compactors 816
2025 Caterpillar Landfill Compactors 816
Helping You Crush ItPurpose-built for landfill operation, the Cat 816 delivers features, performance and efficiency that come from over 50-plus years of industry leadership. Field-proven protection and integrated technologies provide peak availability and optimized landfill performance.
Features may include:
OPERATOR COMFORT AND CONTROL- Improved ingress/egress with a totally redesigned cab with flip up armrest.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
- Safety and visibility enhanced with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Operator productivity enhanced with new membrane switch panels, keyed ignition, and E-H parking brake switch.
- Improved comfort with low operator sound levels.
- TOP-TIER SERVICE AND SUPPORT
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
- Hydraulic oil cooler, fuel cooler, and condenser grouped together
- Centralized grease points
- Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
- POWERFUL EFFICIENCY
- Reliable performance, long life, low emissions.
- High productivity and fuel efficient.
- High productivity and fuel efficient.
- Reliable performance, long life, low emissions.
- POWERFUL EFFICIENCY
- Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
- Centralized grease points
- Hydraulic oil cooler, fuel cooler, and condenser grouped together
- Designed for ease of service and inspection.
- Electronic air inlet restriction indicator.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Focused on safety with ground level or platform access to most major components.
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- TOP-TIER SERVICE AND SUPPORT
- Improved comfort with low operator sound levels.
- Operator productivity enhanced with new membrane switch panels, keyed ignition, and E-H parking brake switch.
- Preferred temperature settings maintained with automatic climate control.
- Safety and visibility enhanced with standard rearview camera.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
Engine
Engine Power
Gross: 284 HP | Net: 248 HP | Gross - ISO 14396 - Tier 4 Final/Stage IV: 274 HP | Gross - SAE J1995 - Tier 3/Stage IIIA Equivalent: 286 HP | Gross - SAE J1995 - Tier 4 Final/Stage IV: 284 HP | Gross - ISO 14396 - Tier 3/Stage IIIA Equivalent: 275 HP
Engine
Model: Cat® C7.1:
Engine Torque
Rise: 52 % | Maximum Net - 1,400 rpm - Tier 4 Final/Stage IV: 899 lb/ft | Maximum Net - 1,400 rpm - Tier 3/Stage IIIA Equivalent: 749 lb/ft
Bore
4.1 in
Stroke
5.3 in
Displacement
427.8 in³
Rated Engine Speed
High Idle: 2270 r/min | Low Idle: 800 r/min
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Drivetrain
Transmission
Cat Planetary Power Shift
Steering
System - Pump: Piston – Variable Displacement | System - Circuit: Closed Center Load Sensing
Brakes
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Operational
Operating Speed
Travel - Forward - Second: 6.8 mile/h | Travel - Reverse - First: 4.3 mile/h | Travel - Forward - First: 3.8 mile/h | Travel - Reverse - Second: 7.8 mile/h
Hydraulics
Airflow
Pump at 2,200 rpm: 23.5 gal/min | Maximum System : 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Maximum Pressure
Maximum Supply: 2930 psi | Main Relief: 3190 psi | Steering Limited: 4003 psi
Performance
Noise Level
Operator Sound Pressure Level (ISO 6396:2008): 72 dB(A) | Machine Sound Power Level (ISO 6395:2008): 111 dB(A) | Operator Sound Pressure Level (ISO 6396:2008): 70 dB(A) | Machine Sound Power Level (ISO 6395:2008): 109 dB(A)
Dimensions
Dimensions
Maximum Altitude - Without Derating: 9842.52 ft | Oscillation Angle: ±6° | Hitch to Centerline of Front Axle: 5.5 ft | Centerline of Rear Axle to Bumper: 6.5 ft | Vehicle Articulation Angle: 84 ° | Paddle Tips - Drum Diameter: 55.1 in | Paddle Tips - Outside Diameter: 67.6 in | Plus Tips - Outside Diameter: 67.6 in | Plus Tips - Drum Diameter: 55.1 in
Bore
Cylinders, Double Acting - Lift: 4.7 in (120 mm) | Steering: 4 in
Stroke
Cylinders, Double Acting - Lift: 36 in (915 mm) | Steering: 23.5 in
Height
Top of Exhaust Pipe: 11.5 ft | Top of Hood: 8.9 ft | Cab Roof: 12.7 ft | Top of Beacon: 14.3 ft | Paddle Tips - Tip: 6.25 in | Plus Tips - Tip: 6.25 in | Combo Wheels - Tip: 6.25 in | Including Cutting Edge and Screen: 6.4 ft
Ground Clearance
Bumper: 2.7 ft | 1.7 ft | Maximum Lift Above: 3.7 ft
Wheelbase
11 ft
Width
Over Wheels: 131.4 ft | Paddle Tips - over Drums: 131.4 in | Plus Tips - Drum: 40 in | Paddle Tips - Drum: 40 in | Plus Tips - over Drums: 131.4 in | Combo Wheels - Drum: 40 in | Moldboard Length: 11.75 ft | Over End Bits: 12 ft
Overall Length
Maximum: 26.4 ft
Turning Radius
Outside - Blade: 21.2 ft | Inside Turn - Wheels: 8.9 ft | Inside Turn - Blade: 9.5 ft
Wheels
Combo - Outside Diameter: 67.6 in | Combo - Drum Diameter: 55.1 in | Combo - Width over Drums: 131.4 in
Depth, Maximum
of Cut: 1.2 ft
Capacities
Tank Type
DEF: 4.2 gal (US)
Features
Differential - Final Drives - Rear: 11.4 gal (US) | Engine Crankcase: 5.28 gal (US) | Differential - Final Drives - Front: 11.4 gal (US) | Transmission: 14.8 gal (US)
Fuel Capacity
Tank: 132.1 gal (US)
Hydraulic Capacity
Tank Only: 19.8 gal (US)
Cooling System
Tier 4 Final/Stage IV: 21.4 gal (US) | Tier 3/Stage IIIA Equivalent: 19.3 gal (US)
Weights
Weight, In Running Order
Operating: 56899 lb | Maximum Operating (Tier 4 Final/Stage IV): 57345 lb | Maximum Operating (Tier 3/Stage IIIA equivalent): 56793 lb
Weight
Combo Wheels - (Group): 13554 lb | Paddle Tips - (Group): 13126 lb | Plus Tips - (Group): 13982 lb
Features
Features
Front: Planetary – Fixed | Rear: Planetary – Oscillating | Combo Wheels - Replaceable: Welded | Plus Tips - Tips per Row: 5 | Paddle Tips - Tips per Row: 5 | Combo Wheels - Tips per Wheel: 20 | Plus Tips - Replaceable: Welded | Paddle Tips - Tips per Wheel: 20 | Plus Tips - Tips per Wheel: 20 | Combo Wheels - Tips per Row: 5 | Paddle Tips - Replaceable: Welded
Product Photography
WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust,
carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary,
service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel.
For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle
and https://www.p65warnings.ca.gov/products/marine.