2025 Caterpillar Landfill Compactors 826

Information

2025 Caterpillar Landfill Compactors 826

Do More with Less

Purpose-built for landfill operation, the Cat 826 delivers a level of reliability, performance, safety, operator comfort, serviceability, and efficiency that can only come from 45-plus years as an industry leader. Field-proven protection and integrated technologies provide peak availability and optimized landfill performance.

Features may include:

OPERATOR COMFORT AND CONTROL
  • Flip-up armrest for easy ingress/egress.
      • Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
          • Enhanced visibility with standard rearview camera.
              • Preferred temperature settings maintained with automatic climate control.
                  • Cat Premium Plus seat with standard features, including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
                    • TOP-TIER SERVICE AND SUPPORT
                      • Easy access in a controlled environment; electronics bay is located inside the cab.
                      • Focused on safety with ground level or platform access to most major components.
                      • Ground level: engine shutdown switch, lockable battery disconnect, and auxiliary jump start receptacle.
                      • Quick visual inspection and minimized fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
                      • Electronic air inlet restriction indicator.
                      • Operators and technicians can resolve any problems before failure using VIMS.
                      EFFICIENCY AND PRODUCTIVITY
                      • Improved performance, long life, low emissions.
                      • High productivity and fuel efficient.
                      • Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
                      • For the Tier 4 Final, EU Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
                      • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
                      • Experience maximum responsiveness and control with Steering and Transmission Integrated Control (STIC™) system.

Photos

Highlights

  • San Diego, California
  • 2025
  • Caterpillar
  • Landfill Compactors 826
  • Model: C15 Cat®
  • Planetary - Powershift - ECPC
  • Available
  • Over Wheels: 12.47 ft | Drum: 47.2 in | Over Drums: 3800 mm
  • to Top of Air Conditioning Condenser: 14.99 ft | Cab Roof: 13.75 ft | Top of Beacon: 15.63 ft | Top of Exhast Pipe: 14.56 ft | Top of Hood: 10.87 ft | Tip: 179 mm | Tip - Diamond: 7.25 in

Specifications

  • 2025
  • Caterpillar
  • Landfill Compactors
  • 826
  • Landfill
  • Model: C15 Cat®
  • Gross - SAE J1995(2014): 435 hp | Net - SAE J1349(2011): 405 hp | Net - ISO 9249(2007): 405 hp | ISO 14396(2002): 426 hp
  • U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
  • 1800 | High Idle Speed: 2300 r/min | Low Idle Speed: 800 r/min
  • Rise 33%
  • Hydraulic System: 4.7 in | Hydraulic System - Steering: 4.5 in
  • Hydraulic System: 42.1 in | Hydraulic System - Steering: 22.7 in
  • 927.6 in³
  • Planetary - Powershift - ECPC
  • Pilot operated, load sensing
  • Service: Multi Disc Wet (Enclosed) 2 WHL
  • Drum and Shoe, Spring Applied, Hydraulic Released
  • Direct Drive - Forward 1: 4.2 mile/h | Direct Drive - Forward 2: 7.5 mile/h | Direct Drive - Reverse 1: 4.3 mile/h | Direct Drive - Reverse 2: 8.6 mile/h
  • Operator Sound Pressure Level (ISO 6396:2008): 73 dB(A) | Machine Sound Power Level (ISO 6395:2008): 113 dB(A) | Operator Sound Pressure Level (ISO 6396:2008): 72 dB(A) | Machine Sound Power Level (ISO 6395:2008): 110 dB(A)
  • Pump at 1800 rpm: 30.9 gal/min | Maximum System:170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
  • Main Relief: 3771 psi | Maximum Supply: 3495 psi | Steering Pressure Limited: 3481 psi
  • Piston - Variable Displacement
  • Oscillation Angle: ±5° | Vehicle Articulation Angle: 86 ° | Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard: 9.38 ft | enterline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard: 10.16 ft | Outside Diameter: 77.6 in | Outside Diameter - Diamond: 78.1 in | Drum Diameter: 63.4 in
  • to Top of Air Conditioning Condenser: 14.99 ft | Cab Roof: 13.75 ft | Top of Beacon: 15.63 ft | Top of Exhast Pipe: 14.56 ft | Top of Hood: 10.87 ft | Tip: 179 mm | Tip - Diamond: 7.25 in
  • 2.11 ft | Bumper: 3.15 ft
  • 12.14 ft
  • With Blade on Ground - Straight Blade - Including Rear Radiator Guard: 28.59 ft
  • Over Wheels: 12.47 ft | Drum: 47.2 in | Over Drums: 3800 mm
  • Inside of Wheels: 9.18 ft
  • 30.6 gal (US)
  • Axles Front: Planetary - Fixed | Axles Rear: Planetary - Oscillating | Feet Per Row: 6 | Feet Per Wheel: 30 | Replaceable: Weld On
  • 206.6 gal (US)
  • 35.4 gal (US)
  • (Tier 4 Final/Stage V): 90207 lb | (Tier 3/Stage IIIA equivalent): 89186 lb | Maximum (Tier 4 Final/Stage V): 92568 lb | Maximum (Tier 3/Stage IIIA equivalent): 91549 lb
  • ombination Tips (Weight Group): 21125 lb | Plus Tips - Weight (Group): 22002 lb | Paddle Tips - Weight (Group): 20540 lb | Diamond Tips Weight (Group): 23997 lb
  • System: Double Acting Cylinder