2025 Caterpillar Hydraulic Mining Shovels 6015 Tier 1 or Tier 2 Equivalent Emission

Information

2025 Caterpillar Hydraulic Mining Shovels 6015 Tier 1 or Tier 2 Equivalent Emission

More Time to Load More

The Cat® 6015 Hydraulic Shovel lets you move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With class-leading tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

Features may include:

SAFETY
  • Five emergency shut-off switches, with one easily accessible in the cab to shut down the electrical system in case of emergency.
  • Safer service with lockable starter and battery isolation switch cabinet.
OPERATOR CAB
  • Heated, pneumatically-cushioned and fully adjustable suspension seat that provides height and weight adjustments, lumbar support, wide arm/wrist rests and a wide retractable seat belt for full operator comfort and support.
  • Maintained internal ambient temperature with air conditioning, heat and defroster, and improved filtration with fresh air filter that removes dust and particles, plus a second internal filter that cleans recirculated air inside the cab.
RELIABILITY & DURABILITY
  • Rugged Cat heavy duty undercarriage designed to increase uptime, deliver longer service life and withstand increased tramming over rough mine site terrain, with features such as grease lubrication, GLT4 sealing technology and oil-filled rolling components that help it last at least 2,000 hours longer than dry track designs.
  • Cat exclusive Positive Pin Retention 2 (PPR2) track design, which mechanically locks the link to the pin to resist pin walking and link cracking to deliver reliable sealing and maximum track life.
PRODUCTIVITY & PERFORMANCE
  • Faster cycle times and increased productivity thanks to Cat C27 engine, which is the most powerful in its class and provides top performance over an exceptional service life.
  • Fast cycle times and improved energy efficiency delivered by closed-loop swing system, which also generates less heat.
BUCKETS & GET
  • Buckets and ground engaging tools (GET) designed to maximize durability and productivity, ideally matched to your shovel and application, and rebuildable, with wear components available as service parts.
  • Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
  • Hammerless GET designed specifically for the 6015, with no special tools required for removal and installation.

Photos

Highlights

  • San Diego, California
  • 2025
  • Caterpillar
  • Hydraulic Mining Shovels 6015 Tier 1 or Tier 2 Equivalent Emission
  • Model: Cat® C27
  • Available
  • Total: 8.8 ft
  • Maximum Digging: 41.9 ft | Maximum Dump: 27.9 ft

Specifications

  • 2025
  • Caterpillar
  • Hydraulic Mining Shovels
  • 6015 Tier 1 or Tier 2 Equivalent Emission
  • Large
  • Model: Cat® C27
  • Output - SAE J1995: 824 hp | Net - SAE J1349: 746 hp
  • U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
  • 12
  • 5.4
  • 6 in
  • 1648 in³
  • Turbocharged and air-to-air aftercooled
  • Wet multiple disc brake, spring-loaded/hydraulically released
  • 4 × 200 Ah (12 V each)
  • System Voltage: 24 V
  • 150 A (24 V) in total
  • 23.6 psi
  • Maximum Swing: 4.9 r/min | Travel Speed - Two Stages - 1st Stage - Maximum: 1.4 mile/h | Travel Speed - Two Stages - 2nd Stage - Maximum: 2.1 mile/h | UndercarriageTravel Speed - Two Stages - 1st Stage - Maximum: 1.6 mile/h | Undercarriage Travel Speed - Two Stages - 2nd Stage - Maximum: 2.3 mile/h
  • Maximum Drawbar Pull - Forward: 192886 lbf | Maximum Drawbar Pull - Reverse: 220987 lbf | Maximum Drawbar Pull: 179847 lbf | Gradeability - Travel Drives : Approximately 42% | Undercarriage Maximum Drawbar Pull - Forward: 192886 lbf | Maximum Tractive Force: 197157 lbf | Undercarriage Maximum Drawbar Pull - Reverse: 220987 lbf | Gradeability - Travel Drives: 38°/78% (SAE J1309) | Bucket Digging Force - ISO: 120947 lbf | Bucket Digging Force - SAE: 112600 lbf | Stick Digging Force - ISO: 104761 lbf | Stick Digging Force - SAE: 98800 lbf | Maximum Material Density - Loose: 3030 lb/yd³
  • Main: 3 × variable swash plate pumps | Pilot: 1 × gear pump | Swing: 1 × variable swash plate pump | Engine Fan: 1 × variable swash plate pump | Hydraulic Fan: 1 × variable swash plate pump
  • Main Pumps - Maximum Total Oil: 407 gal/min | Pilot Pump - Maximum: 40.4 gal/min | Engine Fan Pump - Maximum , Engine Fan: 53.1 gal/min | Hydraulic Fan Pump - Maximum , Hydraulic Fan: 22.7 gal/min | Swing Pump - Maximum - Swing: 127 gal/min | Hydraulic Oil Cooling - Maximum: 284 gal/min
  • Main Pumps - Attachment: 4641 psi | Pilot Pump - Pilot: 1378 psi | Main Pumps - Travel: 4641 psi | Engine Fan Pump - Engine Fan: 3191 psi | Hydraulic Fan Pump - Hydraulic Fan: 1958 psi | Swing Pump - Swing: 5294 psi
  • Track: 28 in | Hydraulic Oil Cooling - Diameter of Fan: 40 in | Maximum Digging Reach: 45.6 ft
  • 36 in | Extra: 39 in
  • Maximum Digging: 26.3 ft
  • Maximum Digging: 41.9 ft | Maximum Dump: 27.9 ft
  • Total: 8.8 ft
  • Bucket: 16.1 ton (US)
  • 449 gal (US)
  • 44 gal (US)
  • Engine: 23 gal (US)
  • Number of Shoes - Each Side: 46 | Number of Track Rollers - Each Side: 9 |Track Pads: Double grouser | Hydraulic Track Tensioning: With accumulator | Swing Ring: Cross roller bearing with sealed internal gearing | Number of Carrier Rollers - Each Side: 3 | Number of Teeth: 5 | Tooth System: Cat C70 or M75
  • System - Including Tank: 463 gal (US) | Tank: 253 gal (US)
  • 154.3 ton (US) | Backhoe: 154 ton (US) | 308000 lb
  • Including Standard Wear Package: 18521 lb