2025 Caterpillar Underground Mining Trucks AD45

Information

2025 Caterpillar Underground Mining Trucks AD45

A Reliable Truck with Emission Control Options

The Cat® AD45 Underground Truck delivers all the power, performance and reliability you expect from the AD45B — but the latest model also offers an an advanced EU Stage V compliant engine and aftertreatment solution that meets the strictest emissions standards, lowers your carbon footprint and improves air quality in your mine. In addition, a retrofit solution is available that allows you to retrofit the previous model, the AD45B, to meet the same strict standards. This ultra-clean diesel machine delivers superior productivity thanks to its ideal match with the next generation Cat R1700 underground loader and is technology-enhanced with features that improve productivity, boost uptime and keep operators and personnel safer on the job.

Features may include:
  • Standard Operator Present System, which protects the machine and operator from uncontrolled machine movements, with hydraulic system neutralization and door sensor.
  • Four corner oil-cooled braking system that provides excellent control, with service brake system actuated by hydraulic pressure and parking brake function that is spring applied and hydraulic released to ensure braking in the event of loss of hydraulic failure.
  • Cat C18 engine, which provides efficient fuel management for quick response, high productivity and exceptional service life.
  • Designed and matched with the integrated chassis system for optimum structural reliability, durability and long life.
  • Box-section frame design with stiff frame beams to resist twisting forces; weld joint and materials matched to optimize structural life.

Photos

Highlights

  • San Diego, California
  • 2025
  • Caterpillar
  • Underground Mining Trucks AD45
  • Available

Specifications

  • 2025
  • Caterpillar
  • Underground Mining Trucks
  • AD45
  • Mining
  • Cat®
  • Model: C18
  • Gross - SAE J1995: 589 HP | Gross - VR Engine - SAE J1995: 589 HP | Gross - Tier 3 Engine - SAE J1995: 589 HP | Gross - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995: 589 HP
  • 2000 r/min
  • 5.7 in
  • 7.2 in
  • 1104.53 in³
  • Forward - 1: 4.4 mile/h
  • Forward - 2: 5.9 mile/h
  • Forward - 3: 8 mile/h
  • Forward - 4: 10.8 mile/h
  • Forward - 5: 14.6 mile/h
  • Forward - 6: 19.7 mile/h
  • Forward - 7: 26.4 mile/h
  • Reverse - 1: 4.2 mile/h | Reverse - 2: 5.6 mile/h
  • Differential Ratio: 3.46:1 | Final Drive Ratio: 5.65:1 | Total Reduction Ratio: 19.55:1
  • Size: 29.5 × R29
  • Size: 29.5 × R29
  • Mass: 91285 lb | Weight Distribution: Empty-Front Axle - 70.7% / Empty - Rear Axle: 29.3% / Loaded - Front Axle: 46.8% / Loaded - Rear Axle: 53.2% | Raise: 15 s | Lower: 21 s | Total Cycle Time: 36 s
  • Articulation Angle: 42.5° | Frame Oscillation: 10° | Inside Clearance Radius: 209 in
  • Clearance: 371 in
  • Engine Crankcase - With Filter: 16.9 gal (US) | Transmission: 15.9 gal (US) | Hydraulic Tank: 70.3 gal (US) | Front Differential and Final Drives: 20.3 gal (US) | Rear Differential and Final Drives: 21.9 gal (US)
  • Body Capacities: 18.0-25.1 m³ (23.5-32.8 yd³) | Ejector Body: 29.9 yd³ | Dump Body - 1: 23.6 yd³ | Dump Body - 2 - Standard: 27.9 yd³ | Dump Body - 3: 32.8 yd³ | Ejector Body: 29.9 yd³
  • Tank: 201.8 gal (US)
  • Nominal: 99208 lb
  • 22.5 gal (US)
  • Operating Mass: 91285 lb | Operating Mass - Front Axle: 64565 lb| Operating Mass - Rear Axle: 26720 lb| Operating Mass + Rated Payload: 190495 lb| Operating Mass + Rated Payload - Front Axle: 89235 lb| Operating Mass + Rated Payload - Rear Axle: 101260 lb