2025 Caterpillar Large Wheel Loaders 988

Information

2025 Caterpillar Large Wheel Loaders 988

An industry leader—made better

The Cat® 988 Wheel Loader helps you move more material in less time, at a low cost per ton, for a fast return on your investment. This machine offers significant fuel savings with durability to achieve multiple lifecycles.

BenefitsBETTER FUEL EFFICIENCY

Utilizing Economy Mode helps save on fuel all while maintaining productivity

EASIER MAINTENANCE

Make regular maintenance more convenient with grouped service points

MORE PRODUCTIVITY

Deliver more productivity in most truck loading applications while using performance series buckets with increased capacities

Features may include:

Proven Reliability
  • Cat C18 engine is built and tested to meet your most demanding applications.
  • Cat torque converter with lock-up clutch helps reduce torque converter losses and lowers system heat.
  • Maximum responsiveness with Steering and Transmission Integrated Control (STIC™).
Performance And Productivity
  • Superior digging, higher bucket fill factors, reduced dig times.
  • Improved visibility over the top of the linkage.
  • Operators can now monitor tire pressure during operation. Any change sending a fault code to VisionLink®, helps prevent premature tire failure.
Safety First
  • Achieve precise positioning for easy loading in tight areas with 43 degrees of steering articulation.
  • Precise machine control by load-sensing hydraulic steering system.
  • Reduced stairway angles and standard stairway lighting provide reduced risk of slips, trips, and falls due to better visbility of the steps and stairway.
Save On Service And Maintenance
  • Grouped service points provide easy access to critical daily service checks.
  • Swing-out engine compartment service doors.
  • Reduced waste with maintenance-free batteries.
Operator Comfort And Control
  • World-class operator comfort and ergonomics.
  • Cat Premium Plus seat with standard features including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
  • Easy-to-reach levers and seat-mounted implement pod to help reduce fatigue.
  • Ergonomic switch placement and displays with LED indicators.
  • Two-position rocker switch activates the electro-hydraulic parking brake.

Photos

Highlights

  • San Diego, California
  • 2025
  • Caterpillar
  • Large Wheel Loaders 988
  • Model: Cat® C18 ™
  • Cat planetary powershift
  • Available
  • High Lift Linkage B-Pin at Maximum Lift: 19.3 ft | Standard Lift Linkage B-Pin at Maximum Lift: 18 ft|

Specifications

  • 2025
  • Caterpillar
  • Large Wheel Loaders
  • 988
  • Large
  • Model: Cat® C18 ™
  • Net Power - SAE J1349:2011: 538 hp | ISO 14396:2002: 580 hp | Gross Power - SAE J1995:2014: 588 hp
  • 1700/min | Peak Power Speed: 1500/rpm |
  • 1,200 rpm - SAE J1995: 1778 lb/ft
  • 5.7 in
  • 7.2 in
  • 1105 in³
  • U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
  • 58 %
  • Cat planetary powershift
  • Forward - 1: 4 mile/h | Direct Drive - Forward 1: Lock-up disabled
  • Forward - 2: 7.2 mile/h | Direct Drive - Forward 2: 7.8 mile/h
  • Forward - 3: 12.7 mile/h | Direct Drive - Forward 3: 13.9 mile/h
  • Forward - 4: 21.6 mile/h | Direct Drive - Forward 4: 24.4 mile/h
  • Reverse - 1: 4.7 mile/h / Reverse - 2: 8.3 mile/h / Reverse - 3: 14.4 mile/h / Direct Drive - Reverse 1: 5 mile/h | Direct Drive - Reverse 2: 8.9 mile/h | Direct Drive - Reverse 3: 15.8 mile/h
  • System - Pump: Piston, variable displacement | System - Circuit: Pilot, load sensing | Total Angle: 86°
  • Final Drives: 49.1 gal (US)
  • Final Drives: 49.1 gal (US)
  • ISO 3450:2011
  • Rack Back 4.5 s | Raise: 8 s | Dump: 2.2 s | Lower: 5.2 s | Lower Float Down: 3.5 s | Total Hydraulic - Empty Bucket: 18.2 s | Steering Cycle Times - High Idle: 3.4 s | Steering Cycle Times - Low Idle: 5.6 s
  • Operator Sound Level (ISO 6396:2008): 73 dB(A) | Machine Sound Level (ISO 6395:2008): 111 dB(A)
  • Maximum Flow at 1,400-1,860 rpm: 153 gal/min | Steering: Maximum Flow: 71.3 gal/min
  • Lift/Tilt: 4757 psi | Main: 551 psi | Steering: 4351 psi
  • Cylinders, Double Acting - Tilt, Bore and Stroke: 269 mm × 685 mm (8.7 in × 27 in) | Cylinders, Double Acting - Lift, Bore and Stroke: 210 mm × 1050 mm (8.7 in × 41.3 in) | High Lift Linkage Front Axle Centerline to Bucket Tip: 15.3 ft | Quick Coupler and 6.1 m³ (8.0 yd³) Bucket Front Axle Centerline to Bucket Tip: 12.2 ft | Quick Coupler and Fork Front Axle Centerline to Bucket Tip: 12.6 ft | High Lift Linkage Rear Axle - Centerline to Bumper: 10.5 ft | Standard Lift Linkage Rear Axle - Centerline to Bumper: 10.5 ft | High Lift Linkage Rear Axle Center Line to Bumper: 10.3 ft | Standard Lift Linkage Rear Axle Center Line to Bumper: 10.3 ft | Standard Lift Linkage Clearance at Maximum: 11.9 ft | High Lift Linkage Clearance at Maximum: 13.3 | High Lift Linkage Reach - Maximum: 6.8 ft | Standard Lift Linkage Front Axle Centerline to Bucket Tip: 14 ft | Standard Lift Linkage Reach - Maximum: 6.5 ft | Standard Lift Linkage Clearance at Maximum: 10.1 ft | Oscillation Angle: 13 ° | Standard Lift Linkage Ground to Top of ROPS: 13.8 ft | Standard Lift Linkage Ground to Top of Exhaust Stacks: 14.8 ft | Standard Lift Linkage Ground to Top of Hood: 10.9 ft | High Lift Linkage Ground to Top of ROPS: 13.8 ft | High Lift Linkage Ground to Top of Exhaust Stacks: 14.8 ft | High Lift Linkage Ground to Top of Hood: 10.9 ft | Ground to Center of Rear Axle: 3.2 ft | Ground to Fuel Tank Clearance: 2.3 ft | Standard Lift Linkage Ground to Lower Hitch Clearance: 1.9 ft | High Lift Linkage Ground to Lower Hitch Clearance: 1.9
  • High Lift Linkage B-Pin at Maximum Lift: 19.3 ft | Standard Lift Linkage B-Pin at Maximum Lift: 18 ft|
  • Standard Lift Linkage Maximum - Bucket Raised: 24.5 | High Lift Linkage Maximum - Bucket Raised: 25.8 ft
  • Standard Lift Linkage Maximum: 39.3 ft | High Lift Linkage Maximum: 40.7 ft
  • High Lift Linkage: 4.9 ft | Standard Lift Linkage: 14.9 ft
  • Tank: 188 gal (US) | Short Lift: 127 gal (US) | Diesel Exhaust Fluid Tank: 8.7 gal (US)
  • Pilot System: Variable displacement piston | Axles Front: Fixed | Rear: Trunnion | Cat Truck Match - Standard: 770～772 | Cat Truck Match - High Lift: 773～775
  • Rated Payload - Quarry Face: 12.5 t | Rated Payload - Loose Material: 16 t
  • 31.7 gal (US) | Coolant (Validated by Test Cell Fill Quantities): 33 gal (US)
  • Operating: 112574 lb
  • Lift/Tilt System - Circuit: EH- Positive Flow Control, Flow Sharing | Lift/Tilt System: Variable displacement piston