2022 Caterpillar Diesel Generator Sets CM46DF Inline

Information

2022 Caterpillar Diesel Generator Sets CM46DF Inline

Producing reliable power from 5290 to 7930, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM43C 50 and 60 Hz, 12 or 16 cylinder V-type, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

POST-EMISSION TREATMENT SYSTEMS FOR LOWER EMISSION REQUIREMENTS AVAILABLE STAGE 1 AND 2 WORLD BANK (WB) EMISSION CERTIFICATION

Features may include:

  • Reliable Operation
  • Control & Monitoring
  • Ease Of Installation
  • Ease Of Operation
  • Intelligent Simplicity
  • Ease Of Maintenance
  • Fuel
  • Emissions
  • Expertise & Experience

Photos

Highlights

  • San Diego, California
  • 2022
  • Caterpillar
  • Diesel Generator Sets CM46DF Inline
  • Gas / diesel oil / heavy fuel oil (HFO) / crude oil
  • Available
  • Minimum: 134 in | Maximum: 134 in
  • Minimum: 247 in | Maximum: 262 in

Specifications

  • 2022
  • Caterpillar
  • Diesel Generator Sets
  • CM46DF Inline
  • General
  • Model: CM46DF Inline, 4-stroke-engine
  • 18.11 in
  • 24.02 in
  • /Fuel Strategy: (WB) Cert stage 1 and 2
  • Turbocharged-aftercooled
  • Gas / diesel oil / heavy fuel oil (HFO) / crude oil
  • Minimum Rating: 5290 kWe | Maximum Rating: 7930 kWe | Voltage: 3000 to 13800 Volts | Engine Rating Range: 5400 - 8100 kW
  • Frequency At Speed: 50 Hz @ 500 / 60 Hz @ 514
  • Ready To Accept Loads (Preheated/Vented): 40 s | Normal Ramp Up To 100% Load: 80 s | Emergency Ramp Up 10% To 100% Load: 25 s | Genset Efficiency Up To: 47.40% | Specific Fuel Oil Consumption (WB I) Up To: 0.41 Ib/kWh | Specific Fuel Oil Consumption (WB II) Up To: 0.41 Ib/kWh | Specific Lube Oil Consumption: 0.001 Ib/kWh
  • Mean Effective Pressure Up To: 309 psi
  • Minimum: 247 in | Maximum: 262 in
  • Minimum: 480 in | Maximum: 569 in
  • Minimum: 134 in | Maximum: 134 in
  • Swept: 6186 in³
  • Genset (minimum): 392422 lb | Genset (maximum: 529109 lb
  • Duty Cycle: Prime, Continuous | Configuration: 6,7,8,9 cylinder